Ask for a free quote.
Slurry tanker ULTRACIS 1550
Designed to offer an alternative for farm operators who need extra slurry spreading capacity at peak times, but need to keep an eye on costs.
ULTRACIS series have self-supporting galvanized tanks with baffles for maximum stability. The vehicle axle and drawbar are connected by two sturdy longitudinal reinforcements, which also carry all supply lines (air, oil, electricity) and protect them from mechanical damage. The drawbar height can be adjusted among several levels. By swivelling the drawbar, it can be switched from clevis to hitch coupling as a standard feature. Hydraulic drawbar suspension is available as an option.
Slurry Distributing Systems:
Drag hose applicator Albatros
Trailing shoe applicator Condor
Highlights
-
Chassis
Fully galvanized chassis frame, drawbar with height adjustment device (low and high mounting), towing eye ball K80, landing gears (with gear box, double speed, three-stages), road lighting system, wheel chocks
- prev
- 1/
- next
-
Axle
Sturdy robust aggregate with two BPW-axles with 10-stud rims, track 2150 mm, wheelbase 1900 mm, load capacity 20000 kg, FL 4118|4112 brake, steering axle
- prev
- 1/
- next
-
Barrel body
Fully galvanized barrel body with wall thickness 6 mm, a recess for wide tyres, integrated baffle, connections for suction and discharge lines with quick coupler, slurry shovel with hydraulic actuation, level indicator, dome valve and siphon with sight glass, manhole cover at the back, hose storage brackets left and right, manometer, safety valve secured to 0.5 bar
- prev
- 1/
- next
-
Compressor
JUROP PN 106 with overpressure safety valve, flow rate at atm. pressure 11000 l/min, max. overpressure 1.0 bar, power requirement 13.6 kW
WANGEN processing cavity pump GL-F 4000, flowrate 4000 l/min, robust rotor over PTO drive with a feather key (reinforced version), axle gasket with oil tank, mechanical seals, double bearing with pin-bearing
- prev
- 1/
- next
Specification
| SUPERCIS 500 / 650 | SUPERCIS 800 / 1000 | ULTRACIS 1200 | ULTRACIS 1550 | ||
|---|---|---|---|---|---|
| Weight & Payloads | |||||
| Barrel capacity (L) | 5200 / 6500 | 8200 / 10200 | 12000 | 15500 | |
| Wall thickness (mm) | 5 | 5 | 6 | 6 | |
| Suction line (m) | 6" (2 m + 3 m) | 6" (2 m + 3 m) | 6" (2 m + 3 m) | 6" (2 m + 3 m) | |
| Unladen weight (depending on configuration) (kg) | 1960 / 2160 | 2580 / 2980 | 5500 | 5800 | |
| Dimensions | |||||
| Barrel body dimensions (W x L) (mm) | 1400 x 3540 / 4540 | 1600 x 4350 / 5370 | 1700 x 5700 | 1800 x 6450 | |
| Overall dimensions (length x width x height) (mm) | 5590 / 6590 x 2420 x 2340 | 6630 x 2550 x 2640 / 7740 x 2700 x 2680 | 8100 x 2550 x 3100 | 8750 x 3000 x 3350 | |
| Chassis | |||||
| Track (mm) | 1850 | 1950 / 2100 | 1950 | 2150 | |
| Axle diameter (mm) | 90 / 120 | 120 / 130 | 120 | 120 | |
| Permissible speed (km/h) | 25 | 25 | 25 | 25 | |
| Tyres | 550/60-22.5“ | 600/55-26.5“ | 550/60-22.5“ | 550/60-22.5“ | |
| Towing | |||||
| Power requirements (kW / HP) | > 47 / 63 / > 52 / 70 | > 59 / 78 | > 110 / 150 | > 120 / 163 | |
Optional equipment
-
- Tyres 600/55-26.5"|BKT|648|170A8
- Tyres 600/55 R26.5|BKT|FL630|176A8|ET-50
- Tyres 650/55 R26.5|BKT|FL630|169D|ET-50
- Tyres 650/55 R26.5|BKT|FL693M|169D|ET-50
- Tyres 710/50 R26.5|BKT|FL630|181A8|ET=0
- Tyres 710/50 R26.5|BKT|FL693|170D|ET=0
- Tyres 710/50 R30.5|ATG|390|176D|ET=0
- prev
- 1/
- next
-
- Tyres 710/50 R30.5|BKT|FL693|173D|ET=0
- Tyres 750/60 R30.5|BKT|FL630|181D|ET=0
- Tyres 750/60 R30.5|ATG|885|181D|ET=0
- Tyres 750/60 R30.5|BKT|FL693M|181D|ET=0
- 40 km/h version
- Side underride guard (required for AT at 40 km/h)
- Rear underride guard (required at 40 km/h)
- prev
- 1/
- next
-
- Towing eye D50 mm
- Towing eye ball K80 (4t)
- Mudguard with built-in pipe carrier (required at 40 km/h)
- Hydraulic drawbar adjustment with vibration damping DW
- Bogie Suspension
- Central lubrication strip for the axle assembly
- Quick coupling for the Bauer system
- prev
- 1/
- next
-
- 6“ exact distributor Perrot or ital. system
- 6“ Möscha distributor
- 6“ vertical sprinkler
- Through drive (additional 3-way hook at the back)
- Automatic suction device with coupling funnel DW
- 6“ cutting filter
- Electro-hydraulic PROFI control of all functions with integrated display and electronic automatic charging
- prev
- 1/
- next
-
- Activation of the hydraulic lid (open/close) DW
- Ladder
- Additional pneumatic slider 6“ + manual changeover (Perrot or Ital.)
- Mounting kit for ALBATROS or CONDOR system
- Equipment for widths over 2550 mm
- Transparent coating 50 μm
- Initial start-up/flat-rate instruction
- prev
- 1/
- next
